Hikvision DS-K1T671TM Face Recognition Terminal

Hikvision DS-K1T671T series face recognition terminal system is a kind of access control device with large screen ratio, which supports 1:N face authentication, fingerprint authentication, card authentication etc. This Fever Screening System can be mainly applied in multiple scenarios in Dubai, such as hospital, school, government offices, enterprise zone, airport, railway station, bus station, banks, metro station and other security check entrances for fever temperature screening and access control.

Specifications

Operation system: Linux

Screen:
7 inch touch screen
Ratio: 16:9
Resolution: 1024 × 600

Camera: 2 MP dual-lens camera, WDR

Recognition mode:
Face: 1:1 and 1:N
Fingerprint: 1:1 and 1:N

Face capacity: 20,000
Face recognition duration: < 0.2 s per person
Face recognition distance: 0.3 to 3 m
Card capacity: 50,000
Card type: M1 card
Card swiping duration: < 1 s
Card swiping distance: 0 to 5 cm
Event capacity: 100,000

Interface:
Network × 1, RS-485 × 1, Wiegand × 1, USB × 1, alarm output × 1, alarm input × 2, ock ×1, door contact × 1, exit button × 1, tamper × 1

Network: 10/100/1000 Mbps self-adaptive
Wi-Fi: Support
Working voltage: 12 VDC/3 A
Working temperature: -30 °C to +60 °C (-22 °F to +140 °F)

Hikvision Ultra Face Recognition Terminal

• Supports Vanadium Oxide uncooled sensor to measure target’s temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
• Recognition distance: 0.3 to 2 m
• Fast temperature measurement mode: Detects face and takes temperature without identity authentication
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc.
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting abnormal temperature
• Configurable door status (open/close) when detecting abnormal temperature
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
• Face recognition duration < 0.2 s/User; face recognition accuracy rate = 99%
• 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
• Suggested height for face recognition: between 1.4 m and 1.9 m
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Watchdog design and tamper function
• Audio prompt for authentication result
• NTP, manually time synchronization, and auto synchronization
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Imports and export data to the device from the client software